11
ADVANCED PROGRAMMING (MONITOR FUNCTIONS)
To activate doctor mode: ress button
once, an audible tone will indicate that the function
p
is activated;
if it is pressed again, an audible tone will indicate that the function will change its
status to deactivated and so on
. The monitor's status LED will blink (red) rapidly when the
monitor exits programming mode and is in standby.
Advanced programming enables the monitor's default settings to be changed:
With the monitor in standby and the handset on the hook:
Press button
for more than 5 seconds to access
'programming mode',
3 short audible tones will confirm this and the status LED will blink
(yellow) slowly, indicating that button
can be released.
Adjusting the call volume: ress button
to select the required volume. Options: maximum,
p
minimum and no volume (if set to 'no volume,' the monitor's status LED will blink red rapidly
when the monitor exits programming mode and is in standby) in 'carousel mode'.
Then adjust the settings as required:
-
Adjusting the call volume:
igh volume (default setting).
h
-
Changing the door panel ringtone melody:
The monitor enables selection of the ringtone (5 different tones).
-
Activating/deactivating the doctor mode function:
doctor mode not activated (default setting).
The 'doctor mode' function enables the main lock release to be activated automatically 3 seconds after making
a call from the door panel without having to establish communication or press door release button . The
call ends after 15 seconds and the channel becomes free.
(Only the master monitor should be configured with 'doctor mode').
Advanced programming of the functions of the Tekna Gtwin monitor:
-
Exiting programming mode:
To exit
press button
for more than 5 seconds, 1 short and 2 long
'programming mode',
audible tones will confirm this and the status LED will turn off, indicating that button
can
be released.
Note:
depending on the function modified, the monitor's status LED will indicate this (see p. 4).
Select the ringtone melody: ress button
until the desired melody is heard 'carousel mode'.
p
-
Changing the ringtone melody from the apartment front door:
The monitor enables selection of the ringtone from the apartment front door (5 different tones).
Select the ringtone melody from the apartment front door: ress button until the desired
p
melody is heard 'carousel mode'.
TEKNA GTWIN MONITOR
