INSTALLATION OF THE MONITOR
Fixing the monitor's wall mounting connector to the wall:
10
Avoid dusty or smoky environments or locations near sources of heat.
To fix the monitor directly to the wall, drill four Ø6mm holes and use the
plugs and screws supplied.
The top of the connector must be positioned at a height of 1.60m. The
minimum distance between the sides of the connector and the
closest object must be 5cm.
Place the monitor at right angles to connector and align the holes on
its base with the fixing clips of the connector, as shown in the
drawing.
Close the monitor like a book, applying pressure to the right-hand
side until the click of the connector's fixing clips can be heard.
To remove the monitor from the connector after installation, use a flat
screwdriver to release the fixing clips. Once the monitor has been
released, open it like a book and remove it from the connector,
making sure that it does not fall.
Fixing the monitor's wall mounting connector to the wall:
TEKNA GTWIN MONITOR
