golmar SV-372S Colour, Инструкция по эксплуатации

Страница: 8 / 24

47
POWER SUPPLY INSTALLATION
LOCK RELEASE INSTALLATION
ock release installation.
L
If the lock release will be installed in a metal door,
use a Ø3,5mm. drill and tap the hole
In case of wood door, use a Ø3mm. drill
.
.
IMPORTANT:
The lock release must be 12V direct current (cod. 20600149), see
page 55 and 57.
Optionally lock release 12Vac with TF104 transformer and SAR-12/24 relay, see page 59 .
etail of the FA-372 power supply installation and technical features.
D
DIN 46277
Input
Power
Output
Working temperature
Dimensions
Weight
230 Vac / 50 Hz
25 VA
17 Vdc 1,5A
0ºC ~ + 35ºC
54(W) x 83(H) x 58(D) mm.
136 gr.
Technical features
IMPORTANT: Replace the protection cover once the input terminals have been wired.
To install the power supply directly on the wall, drill two
holes of Ø6mm. and insert the wallplugs Fix the
transformer with the specified screws
.
.
The power supply can be installed on a DIN 46277
guide simply pressing it To disassemble the power
supply from the DIN guide, use a plain screwdriver
to lever the flange as shown on the picture
.
.
The FA-372 power supply uses 3 units over DIN guide.
The power supply must be installed in a dry and
protected place It's recommended to protect
the power supply by using a thermo-magnetic
circuit breaker
.
.
M 4 x 8
3,5 x 25
DIN-7972
DIN-963
3,5 x 25
DIN-7971
3,5 x 25
DIN-7971
This device has been exclusively designed to be used on Golmar Kit video SV-372S Colour. Golmar
will not be responsible of the possible damages caused for an improper use or when used for
other purposes than the specified. Install the power supply according to your country rules.
48
MONITOR DESCRIPTION
escription 372S monitor.
D
colour
a.
b.
c.
d.
e.
f .
g.
h. Colour screen 7".
function push buttons.
Led indicator of function push button pressed.
Microphone.
Speaker.
Switch End of Line.
Attachment holes for bracket installation.
Installation terminals:
: Positive (
.
: Negative ( .
BUS
IN
: Input communication Bus (see installation diagrams page 55 and 57 .
BUS
OUT
: Output communication Bus (see installation diagrams page 55 and 57 .
FA-372 power supply)
FA-372 power supply)
)
)
_
+
f
e
h
b
a
d
g
+
BUS
OUT 1
c
2
BUS
IN
1
2
Vcc