DESCRIPTION OF THE TERMINAL
5
Function buttons:
In advanced programming mode (see p. 10), the default functions of function buttons
and
can be changed with
one of the following functions at the same time and per button:
-
:
Function button
Activation of auxiliary device 'A1,' call to secondary guard unit or
auto switch-on.
(1)
-
:
Function button
(1)
Activation of auxiliary device 'A1,' call to secondary guard unit, auto switch-on or intercom.
Start/stop communication button.
With the terminal in standby:
A short 1-second press activates the terminal in function mode (for 5 seconds).
A long 3-second press turns off the terminal. With the terminal turned off, one short
1-second press turns on the terminal (over the next 45 seconds, no operation can be
performed in 'function mode').
In function mode:
A long 3-second press turns off the terminal. With the terminal turned off, one short 1-second press turns
on the terminal (over the next 45 seconds, no operation can be performed in 'function mode').
During a communication process:
The talk/listen function is activated.
With the terminal in standby:
One long 3-second press activates 'ringtone volume mode', with a tone indicating the current volume
selected. Then each long 3-second press (before 5 seconds elapse) selects a ringtone volume level and
so on (in carousel mode) with the following selections (maximum, minimum and no volume 'night mode'.
Note: The 'night mode' status LED blinks red . During a call process, the terminal will emit a ringtone and
)
exit volume mode.
Regardless of the volume selected, the 'apartment interior door call' ringtone will always sound at
maximum volume.
In function mode:
A short 1-second press activates the auto switch-on function, enabling audio communication with door
panels that have this function activated to be established. This only functions if no communication is in
progress.
Auxiliary device 'A1' is activated at any time (regardless of whether the terminal is in standby or function, call,
communication or intercom mode).
With the terminal in standby:
A short 1-second press makes a panic call to the units configured to receive such calls.
In function mode:
A short 1-second press makes a normal call to the main unit.
During call reception and communication processes:
A short 1-second press activates the lock release for 3 seconds.
( )
*
(1)
Factory setting
( )
*
( )
*
NHEA PLUS SE HANDS-FREE AUDIO TERMINAL
Call volume control:
The terminal has a call volume
control with maximum and
minimum volume settings.
Audio volume control:
The terminal has a communication
audio volume control with maximum
and minimum volume settings.
MAX
+
+
-
