23
WIRING DIAGRAMS
Connection of a lock release
Connection of an auxiliary device at the relay output
The drawing shows the connection of a 12Vdc lock release, with a maximum consumption of 270mA. The use of
Golmar CV-14/DC, CV-24/DC, CV-14P/UNI or CV-24P/UNI models is recommended. Activation is carried out
through icon
.
The activation time is 3 seconds, with the possibility of setting it to between 0.5 and 10 seconds (see pp.
-
).
2 26
5
The drawing, by way of example, shows the connection of a second AC lock release. The relay can switch 6A/24V
loads. Activation is carried out through icon
.
The activation time is 3 seconds, with the possibility of setting it to between 0.5 and 10 seconds (see pp.
-
).
2 26
5
If the lock release to be used is alternating current, use a relay and transformer suitable for the consumption, as
well as the varistor supplied. The example shows a Golmar SAR-12/24 relay and a TF-104 transformer
(12Vac/1.5A).
CV-
BUS
CV+ AP+
BUS
CV-
BUS
CV+ AP+
BUS
IN
IN
C
NC
NA
PRI
PRI
Mains
100~240Vac
SEC
SEC
GND
C
CCTV AP-
NA
PRI
PRI
ains
M
100~240Vac
SEC
SEC
1
2
SOUL PANEL- /LITE
7
SOUL PANEL- /LITE
7
SOUL PANEL- /LITE
7
SAR-12/24
TF-104
IMPORTANT:
Installation with 2 access door panels and AP button on both door panels (see page 2 ), one
4
of the door panels must connect the AC lock release (instead of DC lock release).
Lock release
12Va.c / 850mA
Lock release
12Vd.c / 270mA
A C Lock release
SOUL S5110/ART
VIDEO DOOR ENTRY SYSTEM KIT
7 LITE