I N S TA L L AT I O N I N S T RU C T I O N S
INSTALLATION IN VERTICAL SLIDING WINDOWS
Foam seal A
(Adhesive type)
Foam seal C
(Adhesive type-shorter)
NOTE
: The window installation kit can be used with vertical sliding windows between 457mm
and 1219mm wide
.
1
Cut the foam seal A(adhesive type) &
C(adhesive type-shorter) to the proper
length, and attach it to the window sash and
frame.
2
Insert the vent panel assembly, including
extension panels, if needed, into the window
opening. Extend the extension panels, if used.
Foam seal B
(Non-adhesive type)
4
Cut the foam seal B(Non-adhesive type) to
the window width. Stuff the foam seal B
between the glass and the window to
prevent air and insects from getting into the
room.
Extension panel
(if required)
Vent
Panel
3
Carefully lower the window. Secure the vent
panel in place with 4 type B screws, plus
one screw for each extension:
Vent panel only:
4 type B screws
Vent panel and
one extension:
5 type B screws
Vent panel and
two extensions:
6 type B screws
Two vent panels and
two extensions:
9 type B screws
Type B screws
1
5
E
n
g
li
s
h
