GOLDMUND METIS 2 - Analog Preamplifier - 7
2
FIRST INSTALLATION & CONNECTIONS
2.1. POWER CONNECTION
Connect the power cord to the back of the preamplifier and plug it into the nearest wall
plug. Use only a 3 lugs grounded plug, for safety and noise reasons. To get the best sound
of the preamplifier, avoid any multiple plugs or an extension cords.
If the preamplifier is the logical center of your system and you use a star grounding
configuration, you may have to use the earth connection of the AC plug and lift the earth
connection of the other equipment.
2.2. SOURCES CONNECTION
Connect the interconnects between the preamplifier analog outputs and the power amp.
You will plug the cables to the RCA female sockets noted outputs.
Connect the interconnects from the analog source devices to the line inputs number 1 to 5.
Note
: a residual High Frequency noise may remain audible in some circumstances when
an input is left open and is selected. This disturbance has no effect on the preamplifier but
may be avoided easily by short-circuiting plugs applied to all the unused inputs.
