2
Trip Inputs 1 - 8 (T1 - T8)
Trip inputs can initiate playback of a stored message directly or start a command file which
in turn can call any available messages.
The eight trip inputs can be configured as ACTIVE HI or LOW via JP3 (default active LOW).
Trip inputs can be individually configured as N/O or N/C inputs (default N/O) in the INIT.txt
file stored on the SD card.
Trip modes can be configured via the INIT.txt file on the SD card
Stop Input (STP)
A LOW pulse on this line will stop and reset any running message or command file. If the
stop input is held low it will prevent activation of any stored message or command file.
(Stop input line 5v active low standard TTL levels)
Start Input (STT)
When using binary trip inputs (255 messages) a LOW pulse on this line will clock in the
binary code presented on the 8 trip input lines and initiate playback of the corresponding
message.
When using decimal trip inputs (8 messages) this input is inactive.
Control IN 1 - 2 (I1 - I2)
No Function. For future Use
1U Cased Unit rear connections
Compact Cased Unit rear connections
Connections
