Page 8
3.2 Direct Trip Mode:
3.2 Direct Trip Mode:
Direct Trip Mode enables up to 8 video files to be replayed directly via a momentary contact closure on trip inputs 1
to
8.
Trip inputs:
Trip inputs:
Accessing trip 1 replays TRACK1.MPG, accessing trip 2 replays TRACK2.MPG etc.
After playback of a particular track has finished the, DVS1080 will display the ’STANDBY.MPG’ file until a new valid
trip input is applied.
One shot operation:
One shot operation:
Trip inputs have one shot operation i.e. if any trip input is held on, the relevant track will be played once only. The trip
input must be cleared and re-applied for the track to play again.
Project files
Project files
The supplied CD contains different project types including the following which provide different methods of triggering
the DVS1080. These and other project files can be downloaded from our website www.goldingaudio.co.uk
The “DV2 Any interrupts” project allows any MPEG file to be interrupted by any other MPEG file including the one that
is currently playing.
For example, if TRACK1.MPG is playing and trip1 is activated, TRACK1.MPG will restart from the beginning.
The “DV2 Any other interrupts ” project will allow any other file to interrupt the currently playing file but will not allow
itself to re-start if retriggered during playback.
With the “DV2 Uninteruptible” project, an MPEG file will be allowed to finish before accepting a new trigger from the
trip
inputs.
The “DV2 loop8” project provides eight looping tracks and 8 triggered tracks. Tracks 1 to 8 will loop when they are
triggered. Tracks 9 to 16 will play once when triggered and then return to standby.
Files required when using Direct Trip Mode
Files required when using Direct Trip Mode
The following files must ALL be present on the Compact Flash card when using Direct Trip Mode.
Eight video files named TRACK1.mpg, TRACK2.mpg up toTRACK16.mpg, STANDBY.mpg, ??????.PLL, DEFAULT.PRJ
and
BARCODE.INI
??????.PLL is the appropriate file for the triggering method required.
Example of contents of compact flash card:
When
using
video
files:
When
using
stills:
TRACK1.mpg
1STILL.JPG
TRACK2.mpg
2STILL.JPG
TRACK3.mpg
3STILL.JPG
TRACK4.mpg
4STILL.JPG
TRACK5.mpg
5STILL.JPG
TRACK6.mpg
6STILL.JPG
TRACK7.mpg
7STILL.JPG
TRACK8.mpg
8STILL.JPG
STANDBY.mpg
STANDBY.JPG
NOINT.PLL
LPSTILLS.PLL
DEFAULT.PRJ
DEFAULT.PRJ
BARCODE.INI
BARCODE.INI
Note:
The above files MUST be placed in a folder (directory) named MEDIA
at the root of the compact flash card.
