3 Operation Modes.
3 Operation Modes.
The DVS1080 unit can operate in various modes but is shipped to operate in one of the two modes detailed below. If you re-
quire control options or specific interactivity other than those listed below, please contact us to discuss your requirements.
3.1 Basic Play mode:
3.1 Basic Play mode:
Basic play mode requires only .mpg video files or .jpg files to be present on the Compact Flash card.
On power up the DVS 1080 will replay files in alphabetical sequence continuously until power is removed. If only one
file is present on the compact flash card, that file will loop continuously.
Example:
APPLE.MPG
Plays
first
CAR.MPG
Plays second
PLANE.MPG
Plays next
SPACE.MPG
Plays last
Repeat
list
Still Images:
Still Images:
The DVS1080 will replay still images for a preset time in alphabetical sequence in Basic Play Mode.
Example:
LOGO5.JPG (displayed for 5 seconds)
APIC9.JPG (displayed for 9 seconds)
The number before the dot in the above example denotes the length of time the still will be displayed before the next
still or video is displayed. If no number is present before the dot in the filename, the still will be displayed for 5 sec
onds. The files must be placed on the compact flash card in a directory named ‘MEDIA’
Trip Inputs:
Trip Inputs:
Trips inputs 1 to 8 detailed on page 1 are configured to operate as follows in Basic Play mode.
PLAY (Trip 1)
Resumes playback from the start of the last selected video after STOP has been pressed.
Resumes playback of any PAUSED track from the point that it had been set to PAUSE.
STOP (Trip 2)
When STOP is pressed the video stops playing and a black screen is displayed.
PAUSE (Trip 3)
When PAUSE is pressed the video image instantly freezes or a still image will remain on
screen. Press PAUSE again or PLAY to resume normal playback from the position where it
was
paused.
REPEAT (Trip 4)
When REPEAT is pressed the current track or still image will loop continuously.
To disable the repeat mode, press REPEAT or STOP.
If repeat mode is enabled and NEXT TRACK is pressed, the next track will also loop.
NEXT TRACK (Trip 5)
The NEXT TRACK function can be activated only when a track is already playing. When
NEXT TRACK is pressed, the current video stops playing and jumps directly to the start of
the next track in the sequence.
VOLUME DOWN (Trip 6) Decreases audio output.
VOLUME UP (Trip 7)
Increases audio output.
MUTE (Trip 8)
When MUTE is pressed, all audio output is muted.
Press MUTE again to resume normal sound of all tracks.
Note
1:
The selected function will be displayed on screen briefly when a trip is activated.
Contact Golding Audio if you wish to disable the on screen messages in ‘basic mode’.
Page 7
