GOLDENSEA UV UVM216, Руководство пользователя

Страница: 10 / 20

www.goldenseauv.com
9
5. Installation Instructions
5.1.
Installation of Wheels
The 3 universal wheels of this device had been turned inwards and fixed at the center of
the bottom when it was packed. Before using the product, the 3 wheels must be installed
back to the correct positions.
Steps:
1. Take the device out of the package, loosen the 3 screws (M4x10mm) at the bottom as
shown by circle.
2. Swing the wheels outwards 180°.
3. Fix the wheels in place using the 3 screws (M4x10mm) loosened in step 1.
6. Operation Guide
Note:
Under ideal conditions (an open area with nothing inside), the recommended disinfection
times and areas are: 30mins/60m², 60mins/120m², 120mins/240m².
6.1. Preparation
1. Make sure the device is on an even surface and the wheel brakes are engaged.
2. Make sure NO living beings (other than the operator) are in the disinfection area
before proceeding.
3. Make sure the path to exit the disinfection area is clear before starting the device.
4. Keep in mind of the Delayed Start Time to make sure enough time to exit the
disinfection area before the device starts to emit.
5. Wear anti-ultraviolet protective clothing and the supplied UV protective glasses
before operating the device.
6. Place the supplied warning sign in a conspicuous place at the exit of disinfection area;
If there is more than one exit, then place a warning sign at each exit.