GoldenEar Technology
►
ForceField Manual
ForceField Owner’s Manual
Subwoofer Connection
We recommend the use of high-quality cables and connectors when hooking up your subwoofer
(see your dealer).
InPut/OutPut FACILItIES
Line-Level (RCA) Input –
Allows connection from the Sub/LFE Output of an A/V receiver, processor or other
suit
able low-passed, low-level
source.
High-Level Input/Output –
Allows connection from the Left/Right Main Speaker Terminals of your receiver or
amplifier. Speaker-Level Output sends a high-passed signal to the Left/Right Main speakers.
Wireless Connector –
Allows connection of the optional wireless kit (See Wireless Kit Owner’s Manual for setup
and connection instructions).
COntROL FACILItIES
Your GoldenEar Technology ForceField subwoofer is equipped with operating controls on the back panel to
ensure excellent flexibility and maximum performance in any installation. Most of them are the “set and forget”
type, although you may occasionally find certain controls require minor adjustments.
Subwoofer Level –
This is a volume control, use it to balance the subwoofer output level to best blend with your
other speakers. For suggestions on setting the Subwoofer Controls once your subwoofer has been connected
refer to the section on “Fine Tuning” below.
Crossover Control –
Controls the subwoofer’s upper-frequency cut-off. This control (low-pass filter) is continuously
variable between 40 and 150 Hz. This low pass filter control is used to obtain the optimum transition between
the subwoofer and your main speakers
when the subwoofer is connected using the Speaker-Level Inputs
.
We
receive many questions from subwoofer owners asking us where to set the filter controls in a variety of different
setups. Although many people think that there is a specific frequency at which to set the controls in their system,
8
