manualshive.com logo in svg

Golden Skies Bampf 3D Extreme, Руководство по окончательной сборке

Поделиться
Скачать
Golden Skies Bampf 3D Extreme Скачать руководство пользователя страница 34

34

Decals:

Apply the Decals:

Retrieve the Bampf 3D Extreme decal sheet and locate

the specific decals that are placed on the Fuselage-side , the
fuselage-cowl, the Rudder and the wingtip as shown in the set
of pictures at left.

Separate each decal using a pair of scissors by cutting a

“rough-cut” line between each decal.

Apply the Fuselage-side decal.

Carefully cut as close to the decal pattern-edges to

minimize the amount of clear background area as possible.
Cut all the way around the decal.

Attach the “Bampf 3D Extreme” decal to the fuselage

side area as shown in the picture left.  Start at one end and
lightly touch the decal to the fuselage.  Be sure that the decal
is lined-up and straight & parallel with the color strips just
above it.

Using a squeegee or straight-flat-edge, “squeegee” the

decal into place.  Work out all bubbles for a clean, flat and
bubble free decal application.  Apply to both sides.

Apply the Fuselage-Cowl decal:

Attach the nose decal using the same technique as

described above. Be sure to center it such that the decal is
not covered by the wing or the cowl.  Apply to both sides.

Apply the Fuselage-Rudder decal:

Cut out the “G” , the “S” and the “RC” separately. Attach

the G and S in the staggered format shown and place the
“RC” in between the  G & S.   Attach the two tail decals using
the technique described above.  Apply to both side.

Apply the Wing Decal:

Attach the wingtip decal using the technique described

above.  Apply to both wing-tips.

(There is an extra Decal that may be applied as you

choose.)

We appreciate you placing the Golden

Skies R/C decal logos on you Bampf 3D Ex-
treme.  We are proud of our ARFs and ask that
you credit us with our decal attachments.

Содержание Bampf 3D Extreme























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды