Golden Motor EPO-03HP, Руководство пользователя

Страница: 15 / 22

14
1. Center line (keel line)
Mounting height
To run your boat at optimum efficiency, the water
resistance (drag) of the boat and
Outboard motor must be made as little as possible.
The mounting height of the outboard motor greatly
affects the water resistance. If the mounting height is
too high, cavitation tends to occur,thus reducing the
propulsion; and if the propeller tips cut the air, the
engine speed will rise abnormally and cause the
motor to overheat.If the mounting height is too low,
the water resistance will increase and thereby reduce
engine efficiency. Mount the outboard motor so that
the anti-cavitation plate is between the bottom of
the boat and a level 25 mm (1 in below it.
3 Operation
Operation
The information presented in this section is
intended as reference only. It is not possible
to provide complete instructions for every
possible boat and motor combination. Proper
mounting depends in part on experience and
the specific boat and motor combination.
·
Overpowering a boat could cause severe
instability.Do not install an outboard motor with
more horsepower than the maximum rating on the
capacity plate of the boat. If the boat does not
have a capacity plate, consult the boat
manufacturer.
·
Improper mounting of the outboard motor could
result in hazardous conditions such as poor
handling, loss of control, or fire hazards. For
permanently mounted models, your dealer or
other person experienced in proper rigging should
mount the motor.
Mounting the outboard motor
Your dealer or other person experienced in proper
outboard motor mounting should show you how to
mount your outboard motor.
The outboard motor should be mounted so that
the boat is well balanced. Otherwise, the boat
could be hard to steer. For single-engine boats,
mount the outboard motor on the centerline (keel
line) of the boat.