GOLDEN MASK Deep Hunter Pro 3SE, Инструкция по эксплуатации

Страница: 9 / 16

GM Electronics Ltd.
If you do not have an assistant, “dragging” of the search coil on
a non-metallic sled (PVC, for example) is recommended. The
sled must provide a constant height
(about 15 cm or more) of
the frame from the ground surface. The search should always
begin with a brief pressing of the
“RETUNE” button (the same
is recommended to be carried out periodically during the
search) in order to maintain maximum stability and sensitivity.
The movement of the antenna should be carried out in parallel
bands that overlap by up to 30% in order to not miss any
portion of the search field. The speed of movement should be
about 1 yard per second.
6.Search for metal objects with handle-mounted coils.
When the terrain does not allow searching with a “frame” coil,
Golden Mask Deep Hunter Pro3se can be used with handle-
mounted round search coils. Search with such antennas does
not differ from the search with a “frame”. The round coils are
much more sensitive to identifying small objects and should be
used for such searches. In addition, the purpose of the round
coil is to replace the “frame” in inaccessible areas and provide
an opportunity for individual work, without an assistant. The
movement with round coils should be done very slowly.
Unlike traditional
VLF metal detectors , using the principle of
inductive balance, the Golden Mask Deep Hunter Pro3se can
detect metallic objects without motion. The movement is only
necessary to identify the type of metal, a speed of about one
m/s is sufficient for the discrimination system to function
properly.
The search height above the ground surface with the round
coils antenna
must be constant (about 10 cm or more) .
If you hold the coil too low or touch the ground, you will
experience faulty signals. All activities and settings
recommended for the use with “frame” coils apply as well to
searches with “hand” the round coils.
Golden Mask Deep Hunter pro3se – Instruction manual
9