GOLDEN MASK Deep Hunter Pro 3SE, Инструкция по эксплуатации

Страница: 12 / 16

GM Electronics Ltd.
tests with multiple "samples" of different metallic objects and
sizes, you will learn which values of the
“TRASH/GB” settings
are best for your needs.
The “TRASH/GB” is a 10-turn potentiometer and should be
used its full 10 turns to find desired value for the small
metal pieces which have to be rejected.
11.Charging the built-in battery.
To ensure longer life of the built-in battery it must be charged
with only the supplied charger. You should regularly check the
charge level of the built-in battery with the button
“Battery
Check” (inspection is possible only when the detector is
switched “On”) and you must turn off the detector once the red
LED "Battery" (located in the lower right corner of the indicator)
is lit.
To charge the built-in battery
:
1 . Turn “Off” the detector, remove the coil jack and plug
the charger jack into the connector labeled “Charge” on the
front panel of the device.
2 . Place the detector in an upright position near a power
outlet with voltage 120-240V and connect the automatic
charger into the outlet.
The charging is indicated with a RED-color LED light on
the charger housing.
When the charging process is completed, the LED light
turns blue.
The duration of charge of an discharged battery is about 6
- 8 (8-10) hours.
When the charge is completed, remove the charger from
the power socket and then remove the charger jack from the
connector
“Charge” .
3 . Turn “On” the detector and check the charge level by
pressing “Battery Check” button. With a properly charged
battery, the arm of the indicator must show a value greater than
“8” . If the reading is lower than “8” , reconnect the charger and
repeat the charging process!
Golden Mask Deep Hunter pro3se – Instruction manual
12