EN
19
Ensure good ventilation in the room in which the device is used.
It is forbidden to use the device in rooms containing flammable or explosive gas
mixtures. The device is not explosion-proof. Turning the device on or off may generate
ignition/explosion caused by electric arch which forms in the master switch of the
device.
When turning the vacuum dryer on for the first time, ensure constant supervision over
operation of the device until the time of achieving stable working conditions.
In order to prevent serious damage of the vacuum dryer load, the dryer itself and its
surroundings, pay particular attention to the physical and chemical conditions (e.g. flash
point) of the dryer load. The vacuum dryer is not explosion-proof and therefore it
cannot be used to dry, vaporize or bake paints, enamels or other materials the reagents
of which may form an explosive mixture with air.
It is inadmissible for flammable gas or flammable gas and air mixture to form in the
vacuum dryer chamber or its immediate vicinity.
Large amounts of dusts or caustic vapours inside the vacuum dryer chamber or near
the device may generate deposits inside the device and cause a short-circuit or damage
the electronic components. Therefore, it is important to take all the appropriate
precautions regarding excessive deposits of dusts or caustic vapours inside and outside
the device.
In order to ensure proper air circulation in the vacuum dryer chamber, provide
sufficient gaps between the load and the inside chamber walls. Do not place any load
on the bottom, side walls or under the ceiling of the chamber.
In the case of any problems, such as smoke or unusual odour coming from the device,
turn it off immediately and disconnect the power supply. In such a case, contact the
service centre. Failure to do so may cause fire or electric shock. Never attempt to
repair the device yourself.
Do not use a coiled or tangled supply cable. A coiled or tangled supply cable may
overheat and cause fire. Do not pull, twist or stretch the cable. This may cause an
electric shock. Do not yank or pull the cable to disconnect the power supply. Place the
cable away from heat sources, oil tanks and sharp edges.
Do not dismantle or modify the device. It may cause a risk of electric shock or fire.
Never touch the door or the window during or immediately after operation of the
device. High temperature may cause serious burns.
During a thunderstorm turn the device off and disconnect it from power supply.
5. BEFORE FIRST USE – DEVICE CHECKING, TRANSPORT AND
STORAGE
Upon receipt of the goods, check the packaging for integrity and open it. If the packaging
is damaged, please contact your transport company and distributor within 3 days, and
Содержание Goldbrunn 1450
