Goldblatt G02773 Скачать руководство пользователя

Страница: 19 / 20

• Let the cutting disc get up to full speed and wait for the cutting disc to get wet

before moving the material into the cutting disc.

• Hold the material firmly against the 45° vertical fence and feed the material into

the cutting disc.

• When the cut is made, turn the saw

OFF

. Wait for the cutting disc to come to a

complete stop before removing any part of the material.

NOTE:

Make sure the 45° vertical fence is locked firmly in place before beginning cut.

OPERATION

MAINTENANCE

Make sure that the saw is turned off and unplugged from power source before

installation, before cleaning and maintenace operations.
Apart from diamond discs, there are no other user serviceable parts inside this tile

saw. Refer to qualified service personnel if internal maintenance is required. Any

worn, or damaged parts should be replaced immediately by qualified personnel.

Keep discs in good condition. Poor condition or worn discs can increase the noise

level emitted.
Do not allow dust to accumulate inside, or on the product. After use, clean all

excess dust from the table and the area around the table. Frequently clean the

machine using a soft brush or vacuum cleaner.

Содержание G02773





















Результаты поиска

Содержание G02773

Отзывы:

Похожие инструкции для G02773

Бренды по названию

Популярные бренды

Goldblatt G02773, Руководство пользователя

Результаты поиска

Содержание G02773

Отзывы:

Похожие инструкции для G02773

Бренды по названию

Популярные бренды