TIMER OFF
When the unit is operating press the TIMER button to set the length of time that you would like the unit
to run for before turning off. Each press of the TIMER button will adjust the length of time by 1 hour
increments from 1
–
24 hours. To turn off the Timer function, set the Timer back to
“
0
”
hours or simply
turn the unit off.
TIMER ON
When the unit is Off press the TIMER button to set the length of time that you would like the unit to
remain off before turning on. Each press of the TIMER button will adjust the length of time by 1 hour
increments from 1
–
24 hours. To turn off the Timer function, set the Timer back to
“
0
”
hours or simply
turn the unit on manually.
WARNING:
Take care in positioning your appliance, using the timer will mean
the unit will come on automatically. Fire may result if placed next to combustible
material.
DRY
Press this key to start or stop dry mode.
Press
“dry”,
the dry pattern is displayed on LCD, the dehumidifier runs in dry mode and in continuous
dehumidification. The fan works at
“high
speed
“level
.
The louver swings automatically press the
“swing”
button stops the swing function.
SWING
When the dehumidifier runs, press this key to start swing and the louvre oscillates automatically, and
the swing pattern is displayed on LCD. Press this key again and the louvre will stop at that position.
DEFROST
When the dehumidifier works in low temperature, frost will be produced on the surface of evaporator.
To ensure the dehumidifier performs well, the automatic defrost function is designed with the
dehumidifier.
1When the temperature sensor detects the temperature of the evaporator i
≤
-1°C
，
the dehumidifier
moves to defrost mode automatically and after defrosting, it automatically starts dehumidifying.
When defrosting, the red defrost indicator light illuminates.
When defrosting, the compressor will turn off and the fan runs at mid speed.
WATER TANK FULL ALARM
When the water tank is full a buzzer will sound 10 times and the symbol of water full is shown on the
LCD screen, all other symbols disappear. The dehumidifier stops working and louver closes.
Carefully remove the water tank and empty the water, and then reinstate the water tank. The
dehumidifier will start working in the previously set conditions. If you do not reinstate the bucket within
3 minutes, the dehumidification process will start and there may be water spillage. Hence it is
recommended to switch off the dehumidifier completely from the power socket and then remove the
water bucket.
Operating your Appliance
