WARNING Keep all objects at least 1 metre from the
front, sides and rear of the appliance.
Ensure all external windows and doors are closed
before turning on the unit.
OPERATION
Leave the appliance to stand for two hours after
transport or after the unit has been on its side before
connecting it to the mains supply to let the refrigerant
settle.
Ensure
that
the
water
container
is
positioned
correctly. Plug into power supply.
Press the POWER button to turn the unit On.
The digital display will show the current ambient
humidity and operating mode.
The current ambient humidity level will be indicated
as follows: Lo
(≤30%RH), from 35% to 75% RH
(Relative
Humidity)
in
5%
increments
and
Hi
(≥80%RH).
SET THE HUMIDITY
Press the HUMID/TIMER button once to set the
desired humidity: the existing humidity setting will
flash on the digital display. Use the Up and Down
buttons to cycle through the settings as follows;
Continuous Operation [CO], from 35% to 75% RH in
5% increments.
The units default humidity setting can be adjusted on
this model. To do this, when the unit is Off, press the
HUMID/TIMER button once, the existing humidity
setting will flash on the digital display. Use the Up and
Down buttons to cycle through the settings as follows;
Continuous Operation [CO], from 35% to 75% RH in
5% increments .
NOTE: When the sensor detects an ambient humidity
level 1% lower than the set level the compressor will
turn off and the fan will continue to run. Once the
ambient humidity level increases to 5% higher than
the set level the compressor will turn back on and
continue to dehumidify.
When the machine is On, press and hold the UP and
Down buttons for 5 seconds, the digital display will
show the ambient room temperature.
IMPORTANT!
NEVER
COVER
THIS
DEHUMIDIFIER
MODE
Press the MODE button to set the desired mode:
AUTO, TURBO, QUIET, or FOCUS.
AUTOMATIC MODE: In Automatic Mode when the
humidity and temperature sensor detect the ambient
humidity is 1%RH less than the set humidity, the
compressor will stop and the fan will work in Low
speed.
When the ambient humidity is 5%RH more than set
humidity, the compressor and fan motor will work
according to the default settings below:
A) When the temperature is lower than 24
℃
and the
set humidity is 60%RH, the fan will operate in Low
speed.
B) When the temperature is between 24-25
℃
and the
set humidity is 55%RH, the fan will operate in
Medium speed.
C) When the temperature is over 25
℃
and the set
humidity is 50%RH, the fan will operate in High
speed.
NOTE: When the unit is set to Automatic Mode the
Humidity will automatically be set and the use of the
Up and Down buttons will not function.
TURBO MODE: Within the continuous dehumidifying
mode you can also increase the fan speed. To do
this, press the MODE button until the
“
Turbo
”
flashes
on the electronic display.
QUIET MODE: When quiet mode is selected and the
desired humidity is set, the compressor will stop and
the unit will operate on low speed when the ambient
humidity is 1%RH lower than the set humidity.
When the ambient humidity is 5%RH higher than the
set humidity, the compressor will start and fan will
continue to operate on Low speed.
In quiet mode, press and hold the mode key for 3
seconds for the LED control panel to dim and the
control keys will operate silently.
NOTE: The water tank full beep indicator will not
beep while in silent mode when the water tank is full.
Operating your Dehumidifier
Always choose a safe location for the Dehumidifier, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the unit
before use. This appliance requires no installation, it should be used solely as
a portable appliance.
