Goldair GD415, Руководство по эксплуатации

Страница: 9 / 16

Operating Your Dehumidifier
TANK FULL INDICATOR
When the water tank is full, the dehumidifier will automatically stop operating and
the full water tank indicator will illuminate. Remove the water tank carefully with
both hands and discard the water. Replace the water tank in the correct position. The
dehumidifier will automatically begin operating again.
Note: If the water tank is not installed correctly, the unit will not operate. Always
ensure that water tank is installed correctly.
REMOVING AND EMPTYING THE WATER TANK
1. To remove the water tank, gently pull the water tank out of the back of the
dehumidifier.
2. Empty the tank.
3. Once empty, install the tank back into the back of the dehumidifier.
CONTINUOUS DRAINAGE
If you would like to use the dehumidifier over a long
period of time you can use the continuous drainage
feature.
1.
Connect the drainage hose (supplied) into the
drainage point of the dehumidifier.
2. Reinstall the water tank.
3. Feed other end of the drainage hose into a
suitable drainage point.
Note:
When using the continuous drainage feature,
the hose must drain out below the drainage outlet
without knots or kinks.
Note:
The water tank must still be installed for the
continuous drainage to work.