Operating Instructions
Control panel
1. Heat Function
2. No Function on this model
3. 24 Hour Timer
4. Display
5. Fan Speed
6. Humidity Setting
7. On/Off
1.Heat Function: Turns the heater on and off. (Heater will not turn on if the ambient room temperature is
above 25°C. Also when the Heater is turned on the fan speed will automatically turn to high)
2.No Function: This button has no function for this model.
3.24 Hour Timer:
•When the dehumidifier is running, press the timer button as many times desired to set how many hours
you would like the unit to run before turning off. (If you press the timer button once, the timer will be set for
1 hour, press the button again 2 hours will be set and so on through to 24 hours)
•When the dehumidifier is off,(but still plugged into the mains power) press the timer button to set how
many hours you would like the unit to run before turning on. (If you press the timer button once, the timer
will be set for 1 hour, press the button again 2 hours will be set and so on through to 24 hours)
NOTE:
If you accidentally press the timer button and wish the dehumidifier to be used without the timer
function, cycle through the hour options until you reach zero again (after 24 hours).
4.Display: Shows all function options set.
5.Fan Speed: Set low or high fan speed
6.Humidity Setting: Set the desired room humidity from 50-80%. Press the button to cycle through options,
in order to change between °C and room humidity % press and hold the button for 3 seconds.
NOTE:
This model does not have a °F function
7.On/Off: On/Off button for dehumidifier
