Operating your Dehumidifier
HUMIDITY SETTING
Press the HUMIDITY SETTING button to select the
desired ambient relative humidity level; you can set at
CO (continuous), 50%, 60%, 70%, 80%, AU (comfort
mode).
CONTINIOUS (CO)
If you wish to use the Dehumidifier continuously press
the HUMIDITY SETTING button until the CO light is
illuminated and the Dehumidifier will run until turned
off manually.
COMFORT MODE (AU)
When COMFORT mode is selected as the Humidity
Setting the unit functions as follows:
When ambient temperature is lower than 5
℃
, the
compressor will stop working and the unit will stop
dehumidifying.
When the ambient temperature is higher than 5
℃
and
lower than 20
℃
, the unit will set the humidity to 60%
automatically.
When the ambient temperature is higher than 20
℃
and lower than 27
℃
, the unit will set the humidity to
55% automatically.
When the ambient temperature is higher than 27
℃
,
the unit will set the humidity to 50% automatically.
NOTE: The unit will stop dehumidifying when the
ambient relative humidity is 3% lower than the set
humidity. The unit will start to dehumidify again when
the ambient relative humidity is 3% higher than the
set %.
The recommended operating temperature range is
15
℃
to 35
℃
.
DEFROST
Occasionally the refrigerant around the motor can
become very cool, this will cause the unit to go into
defrost mode. The compressor will turn off and the
fan will continue to run. The DEFROST indicator light
will illuminate on the control panel.
This is a normal function for the dehumidifier and
cannot be controlled by the user.
Once the unit has completed defrosting, the
compressor will turn back on and continue to
dehumidify.
WARNING Keep all objects at least 1 metre from
the front, sides and rear of the appliance.
Leave the appliance to stand for one hour after
transport or after the unit has been on its side before
connecting it to the mains supply to let the refrigerant
settle.
Ensure all external windows and doors are closed
before turning on the unit.
Ensure that the water container is positioned
correctly.
Plug into power supply and switch on at the mains.
To turn the Dehumidifier on, press the POWER
button.
The unit will start to dehumidify on High fan speed
and the Humidity setting is set to continuous.
The operation light will flash until the compressor
starts to run, the light will stop flashing and remain on
when the compressor has started.
The compressor will switch off automatically when the
water container is full. THE FAN WILL CONTINUE
TO RUN.
As long as the water container is not full, the
Dehumidifier will continue to operate until it is
switched off manually.
If the Dehumidifier is switched off manually and then
switched back on, the compressor will start to operate
after three minutes.
To turn the Dehumidifier off, press the POWER
button.
Use the SPEED button to switch between High and
Low fan speeds.
IMPORTANT!
NEVER
COVER
THIS
DEHUMIDIFIER!
WHEN THE WATER CONTAINER IS FULL
A beep signal will sound 15 times. The TANK FULL
indicator light will illuminate on the control panel.
The compressor will stop automatically, and the unit
will stop dehumidifying.
Empty the water container and replace it in the
correct position. The Dehumidifier will continue
dehumidifying when the compressor automatically
restarts after approximately three minutes.
Always choose a safe location for the Dehumidifier, keeping in mind the
safety precautions outlined. Ensure all packaging has been removed from
the unit before use. This appliance requires no installation, it should be
used solely as a portable appliance.
Содержание GD275
Страница 8: ......
