Operating Instructions
Control lights on the control panel
Operation
1. Ensure that the water container is positioned correctly.
2. Plug into power supply, 3 beep signals will be heard.
The device will automatically start to dehumidify. The compressor will switch off automatically when the
water container is full.
As long as the water container is not full the dehumidifier will continue to operate until it is switched off
manually.
If the dehumidifier is switch off manually and then switched back on the compressor will start to operate
after three minutes.
4. To turn the dehumidifier off, simply press the ON/OFF button
Please note: This dehumidifier has a preset humidity setting of 50% if the humidity in the room drops below
50% the unit will stop dehumidifying until the humidity increases to over 50% again.