Goldair GCDBF40DC, Руководство по эксплуатации

Страница: 6 / 8

WARNING Keep all objects at least 1 metre
from the front, sides and rear of the
appliance
Fan control
Place the tower on a dry, level and sturdy
surface. Plug the power cord into the socket.
Power
The fan functions ON and OFF by pressing the
On/Off button either on the unit or the remote
control. The fan will start operating at low
speed.
There are 24 fan speed settings. Air speed is
regulated by turning the speed control.
Turning the dial anticlockwise will decrease the
speed and clockwise will increase the speed.
Operating your Fan
Timer
The fan has an automatic timer to turn the unit
OFF, anywhere between 1 to 7 hours. To set
the timer, press the timer button until the
desired run time is illuminated. The fan will
automatically turn off once the time has
expired. Mode and OSC functions cannot be
used when timer is active.
Mode
By pressing the mode button you can switch
between normal (constant) wind speed,
natural or sleep mode. The control panel will
indicate the working mode of the unit by
illuminating the chosen mode. If no indicator
light is illuminated, the fan is working in
normal mode.
Oscillation
The oscillation feature can be activated by
pressing the oscillation button. The fan can be
set to a stationary position by pressing the
button again.
Remote Control All the above functions can be
controlled from the remote control.
The remote requires a line-of-sight path to
allow for the signal to be received by the unit.
Position the unit so the receiver lens is visible
from the remote control.
The symbols on the Remote correspond to the
symbols on the control panel.
If your remote no longer works, please try
replacing with a new CR2032 battery.
IMPORTANT! NEVER COVER THIS APPLIANCE!
NOTE: The feet on this unit may stick to furniture surfaces and/or hardwood floors. The feet may
leave a residue that could darken, stain or leave permanent blemishes on the finish of certain
surfaces.
Always choose a safe location for the fan, keeping in mind the safety precautions outlined.
This fan is already fully assembled for your convenience. Ensure all packaging has been
removed from the unit before use. This appliance requires no installation, it should be used
solely as a portable appliance.