Goldair GCDBF40DC, Руководство по эксплуатации

Страница: 5 / 8

Your fan has been boxed unassembled to
minimise packaging waste. Each part is
designed to fit together and be disassembled
easily for cleaning and storage.
Start with the base and post as follows.
Remove the base securing screw from the
bottom of the post.
Assembly
Fit the post into the recess on the top of the
base and whilst holding it in place, turn over to
access underneath. Place the base securing
screw over the post and then tighten securely.
Turn the assembly the right way up and sit on
a flat surface.
Un-screw the knob at the base of the motor
shaft and slide onto the extension post.
Secure into place by tightening the knob at the
base of the motor shaft.
Slide the back grill onto the motor housing,
ensuring that it is lined up with the pins and
secure into place by tightening the grill
securing screw.
Slide the large blade into place and then the
small blade over the top and tighten into place
by turning anticlockwise.
To attach the front grill to the back grill,
carefully align them and push together. Secure
by closing the clasp at the base of the grill ring.