SUPPORT AND TECHNICAL ADVICE
Goldair
–
New Zealand
Monday
–
Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]
Goldair
–
Australia
Monday
–
Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
Care and Cleaning
TECHNICAL SPECIFICATION
Model No:
GEPH215
Supply:
240VAC 50Hz
Wattage:
425W
CARE AND CLEANING
Unplug the appliance from the mains supply before
cleaning.
Ensure that the appliance has been allowed to cool
down completely before cleaning.
Use a damp cloth (not wet) to wipe the exterior of the
appliance to remove dust and dirt.
Never use solutions such as benzene, thinners or
polishing agents.
Ensure the appliance is dry before plugging back into the
mains supply.
Do not attempt to dismantle the appliance. There are no
user serviceable parts. For service or repair, contact an
authorised electrical service technician.
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase.
SAFETY DEVICES
This appliance has two protection devices:
1.
Resettable thermal links - these will automatically
disconnect the power to the appliance at a pre-set
overheat temperature. After cooling down it will
reset and power on again. If this occurs, investigate
what is causing the appliance to overheat.
2.
Thermal fuse - this disconnects the appliance
permanently in case of overheating. (It is non
resettable).
Note: The light in the power switch will remain on even
after the safety devices have activated to show there is
still power to the heater
CAUTION: The appliance generates heat during use.
Proper precautions must be taken to prevent the risk of
burns, scalds, fires or other damage to persons.
