OTHER INFORMATION
Open the “GOLDAIR APP” and tap the 3 dots in the top right of the
screen.
Device Info
This shows the heater WiFi ID and the IP address.
Feedback
This gives you the ability to give feedback on the APP that may be useful
for enhancing the APP
Check for Firmware Update
This will advise if there is a more up to date version of the APP.
Remove Device
Use this function to remove the heater you are controlling from the list
of heaters you have loaded.
You will be asked to confirm that you want to do this.
Once deleted you will need to pair this heater again for it to be added
back to your device list.
Restore Manufacture Defaults
This will remove the heater from your device list and all information will
need to be re-set up.
Operating your Heater from the APP
TO FULLY RESET THE HEATER AND REMOVE ALL CONNECTED DEVICES.
Press the “SET” button on the control panel of the heater for 5 seconds until the WIFI indicator on the LCD screen
starts flashing quickly.
All paired devices will be removed and you will need to start pairing again from the beginning.
Flashing
Master Reset
