43
Operation
CAUTION:
Keep hands, feet,hair and clothing
away from all moving parts to prevent injury.
NOTE:
Hose will un-wind with a small amount
of restriction when pulled out by hand
Operation
1. While connected to a power source, the
unit is always powered.
2. Remove the linch pin and check the spray
gun.
3. Test the remote and manual rewind
functions. The manual “REWIND” button
is located on the control box.
4. Unwind the hose (taking care to not over-
run the hose)
5. The hose can then be wound in by
pressing the “REWIND” button on the
remote control.
6. If the reel stops turning due to a hose jam
DO NOT continue to push the button or
damage may occur. Clear the cause of the
jam prior to further operation. If the remote
does not work after the jam, the control
box overload may need to be reset. Press
to reset.
7. When finished, rinse the line out with fresh
water.
8. Retract all the hose and remount the spray
gun.
9. When complete, disconnect the power at
the anderson plug.
Current overload reset button
