Summary:
For this detector alone, there is probably 300 possible
settings. The settings we have given you are for per-
sons with hearing impairment, so as to pre
-
set their
detector without having to use sound and knowing that
it will be working as it should. Those setting are for
highly mineralized noisy ground. But when used on be-
nign ground (low mineralization) those setting will give
you a deeper ground penetration. For some one
starting detecting the setting will make is easier to find
gold.
Detecting and Pinpointing Targets
(with no sound).
Target detection
:
To obtain the best performance, the coil is to be
swung close and parallel to the ground at all times.
Swing from side to side (Fig. 1) while walking for-
ward and notice the slight time delay between the
detector & the response of the Haptic transducer.
The average swinging time is 3 seconds from side to
side.
When the coil is passed over a target, the transduc-
er will respond at either end of a 30 to 40cm gap.
Use imaginary lines or mark the ground. The target
will be situated in the centre. The gap will narrow by
slowing down your swinging.
8
There it is, a nice little gold
nugget
Fig. 1
Fig. 2
