Gold-TEC QUAVAR-PI, Руководство пользователя

Страница: 10 / 14


Tone : 3/4 way up to suit QUAVAR - PI.

Level Adjust : a bit above 1/2.

Soil : Sensitive.

RX Gain : Enhance.

Balance : Tracking
SDC Serie:

Noise cancel : Reset for the area you are working.

Threshold : Set it to about mid way.

Detecting Mode : Pick setting appropriate for the
type of ground you are working.

Audio Pitch : set to low Pitch to suit the QUAVAR - PI.
Note : Follow the steps in the detector ’ s manual and
familiarise yourself with your machine.
GPX Series :

Volume limit : Set high on 16.

Ground Balance : Type, General.

Special : Set for FINE GOLD.

Manual Tune : 46 depending on EMI.

Motion : Slow.

RX Gain : 11 (highly mineralised ground).

Audio Type : Run quiet.

Audio Tone : 43 (when using QUAVAR - PI)
do not go below 40 or above 45

Stabilizer : Set to 6.

Signal Peak : Set to 16

Target Volume : up to 20

Response : Set to normal.

Tracking Speed : Set to medium
Please Note : When using the QUAVAR - PI hearing im-
pairment aid device, the detector ’ s AUDIO TONE must
be adjusted to a set pitch to able the HAPTIC system to
link with your metal detector.
This is important to set the Audio Tone to 43 or slightly
under has not to overload the QUAVAR - PI. Do not go
below 40 or above 45.
7
Flicking through the dirt to
fiend the target