Gold Note DS-10 EVO, Руководство пользователя

Страница: 19 / 100

EN
DE
IT
Select the gear icon
and press the SKC
once to access the settings. Turn the SKC to
browse the settings, press it once to adjust
the highlighted setting.
To exit the menu, select BACK and press the
SKC once.
DISPLAY
Rotate the SKC until the DISPLAY setting
is highlighted, then press the SKC once to
select it.
Rotate the SKC to choose the desired
brightness, then press it once to confirm.
The brightness can be set to:
|
100%
|
50%
|
25%
|
OFF
When the display is set to OFF, use the SKC
or press a button on the remote to activate it
again for 3 seconds.
DEVICE INFORMATION
Push the SKC once to view the device
information, such as:
|
Model
|
Serial number (S/N)
|
Firmware version (FW VERSION)
|
IP address (IP, only when the DS-10 EVO is
connected to the network).
FACTORY RESET
Select OK to reset the unit or CANCEL to
exit the menu.
The unit goes on standby after each reset.
| SETTINGS
MODEL:
FW VERSION:
S/N:
IP:
DEVICE INFO
DS-10 EVO
BACK
DISPLAY 100%
FIRMWARE UPDATE
DEVICE INFORMATION
FACTORY RESET
SETTINGS
BACK
OK CANCEL
Normal
Highlighted
DISPLAY 100%
DISPLAY 100%
DISPLAY 100%
Selected
12
FR