OWNER’S MANUAL
page 65
SYMPTOM
DESCRIPTION
CAUSE
REMEDY
OIL POORED FROM
BRONZE BEARING
PLATTER WOBBLING
SPEAKER HUMMING
PROBLEMS
• The pressure created by the
strict tolerance of the
Bearing/Spindle system can let
some oil drops come out from the
bottom of the Platter Bearing
The speakers hum
when the turntable is
wired to the system
Oil drops come out
the bottom Platter
Bearing when the
Platter Spindle is
inserted
The Platter wobbles
on its edges if
handled
• Clamp the Split-Spindle tip into
the platter threading it using a
metal pin to get into the tip hole
• The Turntable CAN NOT makes
any noise hearable into the speaker
by itself
• Clean it up, the oil will never comes
out again once the Platter spindle is
perfectly positioned into the Platter
Bearing
•Be sure to always use shielded cables
for the amp connections.
For spare parts visit the official
Gold Note
store at:
http://www.akamaiaudio.it/
FAQ AND TROBLESHOTING
• Eventually a tone arm cable
problem can occur; please check
the ground of the cable carefully
