OWNER’S MANUAL
ASSEMBLING TURNTABLE
[Rocker Arm]
STEP
24
Rocker Arm Platter Counterweight (1x) located in
B5
position
2
For the
STEP 24
you need these parts:
STEP 24-1
Thighten the Bronze junction previously installed in the
Rocker Arm Bar into the Platter Bearing as shown in
the picture below
STEP 24-2
Once the Rocker Arm bar is been tightened to the Platter
Bearing with the Bronze junction previously installed
carefully thread the Rocker Arm Platter Counterweight
as shown in the picture below
page 46
