Dogeroo
and
Super Dogeroo
M
ODELS
#8102, #8102FC, #8103
AND
#8104
1
OPERATING INSTRUCTIONS
SPECIFICATIONS
Dogeroo
Super Dogeroo
Hot Dogs
56
84
Buns
40
60
Width
21 ½"
27 ½"
Height
28 ½ "
28 ½"
Depth
15 ½"
15 ½"
Shipping Weight
52 lbs.
67 lbs.
Power Requirements
1680 Watts
1880 Watts
INSTALLATION
1. Carefully remove the machine from the shipping cartons. Remove all packing material and
tape. Check thoroughly for any damage which may have occurred in transit. Claims should
be filed immediately with the transportation company.
2. The glass has been packaged for shipment and placed in the bun warmer basket. Remove
the package and carefully unwrap the glass.
3. Lift off the top frame assembly.
4. Insert glass into channel slots in corner posts and slide the glass down to the bottom of the
unit. CAUTION: Do not drop the glass. If the optional sneeze guard has been purchased,
place it over the corner posts.
5. Set the top frame assembly on the corner post. Make sure it is seated at each corner.
6. Place water pan in the top frame.
7. Place bun warmer on the top frame and slide the bun warmer basket into the warmer.
8. Place rotisserie in position. See page 3 for driveshaft assembly.
9. Be sure to place your Dogeroo where the revolving hot dogs will attract the most attention.
ELECTRICAL REQUIREMENTS
These machines are designed to operate at the voltage requirements and current indicated for
each machine. The power supply cord is equipped with a "machine ground" – the tubular prong
on the male plug. For safety, always plug your hot dog cooker into a grounded type receptacle.
The Dogeroo machine draws 12 amps. The Super Dogeroo machine draws 14.9 amps. Make
certain that the electrical outlet is capable of carrying this much current.
Machine must be properly grounded to prevent shock in case of
electrical problems.
