Countertop Baker Unit
Model No. 5020, 5020T, 5020E, 5020ET, 5020EX, 5020XE 5020ETX, 5023, 5023E, 5023EX
http://www.gmpopcorn.com
Page 5
ELECTRICAL REQUIREMENTS
Electrical Requirements
The following power supply must be provided:
Model No. 5020, 5020E, 5020ET, 5023:
120 Volts, 1000 Watts, 60 Hertz
Model No. 5020EX, 5020ETX, 5023EX:
230 Volts, 1000 Watts, 50 Hertz
DANGER
Machine must be properly grounded to prevent electrical shock to personnel.
Failure to do so could result in serious injury, or death.
DO NOT immerse any part of this equipment in water.
DO NOT use excessive water when cleaning.
Keep cord and plug off the ground and away from moisture.
Always unplug the equipment before cleaning or servicing.
Make sure all machine switches are in the OFF position before plugging the
equipment into the receptacle.
008_051514
A certified electrician must furnish sufficient power for proper machine operation and install any
supplied receptacle. We recommend this equipment be on a dedicated and protected circuit. Failure to
wire properly will void the warranty and may result in damage to the machine. It is Gold Medal Products
Co.’s recommendation that this machine be plugged directly into a wall outlet. The use of extension cords
is not recommended due to safety concerns, and may cause sacrificed and/or reduced performance. Make
sure cord is located to prevent a trip hazard or unit upset.
Before You Plug In Machine
1.
Make sure all machine switches are OFF before plugging equipment into receptacle.
2.
Make sure wall outlet can accept the grounded plugs (where applicable) on the power supply
cord.
3.
The wall outlet must have the proper polarity. If in doubt, have a competent electrician inspect
the outlet and correct if necessary.
4.
DO NOT
use a grounded to un-grounded receptacle adapter (where applicable).
5.
Install unit in a level position.
CAUTION
If the supply cord is damaged, it must be replaced by Gold Medal Products Co.,
its service agent or similarly qualified persons in order to avoid a hazard.
039_080614
