Econo-Floss
Model No. 3017, 3017SR, 3017SS,
Floss-Maxx
3077, and 3077C
Page 4
www.gmpopcorn.com
Electrical Requirements
The following power supply must be provided for your Floss Machine:
3017, 3017SR, 3017SS:
120Volts, 1248 Watts, 60Hz.
3077, 3077C:
120Volts, 1800 Watts, 60Hz.
DANGER
Machine must be properly grounded to prevent electrical
shock to personnel. Failure to do so could result in serious
injury, or death.
Do NOT immerse any part of this equipment in water.
Do NOT use excessive water when cleaning.
Keep cord and plug off the ground and away from
moisture.
Always unplug the equipment before cleaning or servicing.
Your electrician must furnish sufficient power for proper machine operation. We recommend
this floss machine be on a dedicated and protected circuit. Failure to wire properly will void the
warranty and may result in damage to the machine. It is Gold Medal Products Company’s
recommendation that this machine be plugged directly into a wall outlet. The use of extension
cords is not recommended due to safety concerns, and may cause sacrificed and/or reduced
performance.
Before You Plug In Machine
1.
Make sure the wall outlet can accept the grounded plugs (where applicable) on the
power supply cord.
2.
The wall outlet must have the proper polarity. If in doubt, have a competent
electrician inspect the outlet and correct if necessary.
3.
DO NOT
use a grounded to un-grounded receptacle adapter.
4.
Install the unit in a level position.
