Econo-Floss
Model No. 3017, 3017SR, 3017SS,
Floss-Maxx
3077, and 3077C
Page 5
www.gmpopcorn.com
INSTALLATION OF FLOSS STABILIZER
Place Floss Machine Pan on unit and install Whirl Grip Floss Stabilizer as shown below.
1)
Place a Non-Metallic Whirl Clip over the rim of the Floss Pan. The out facing hooks go
to the inside of the Floss Pan.
2)
Hang the Non-Metallic screening material onto the up facing hook with the screening
approximately flush with the top of the pan. Gently pull the screening down and
attach to the down facing hook on the clip to secure screen in place.
3)
Check the clip spacing and the air space required between the pan and the stabilizer
for proper operation.
4)
Continue this process with all clips, keeping equal spacing around the pan.
Whirl Grip
Floss Stabilizer
Clips
Air space is required
between pan and
stabilizer for proper
operation.
Non-Metallic Whirl Clip
Non-Metallic
Screening Material
Top View of Pan
