PopMaxx with
Lighted Sign
Model No. 2552-00-001
Page 15
gmpopcorn.com
Replacing Broken Glass
Broken glass panels can be easily replaced. Gold Medal
Products Co. does not ship glass. It can be
obtained from a local glass shop, always purchase tempered glass.
GLASS DIMENSIONS
(Height x Width x Thickness)
Front and Side Glass:
21 1/4” X 16 7/8” X 1/8” (3 Pieces)
1.
With the machine OFF, unplug the unit and allow it to cool before attempting to
replace any glass.
2.
Carefully remove all loose pieces of broken glass.
3.
Pull out Magnetic Clip (located above glass panel in cabinet interior) to remove (see
Figure A below).
4.
Slide glass panel up under top ridge, then swing the bottom of the panel out and lower
it away from unit (see Figures A and B below).
5.
Carefully remove the rest of the broken glass.
6.
Remove all rigid glass channels from around the glass to be replaced, set channels
aside for reuse.
7.
Apply decals (if desired) to the new glass panel.
8.
Slide rigid glass channels over the exposed edges of the new glass panel.
9.
Carefully slide new glass panel up under top ridge, then lower it into the bottom channel.
10.
Reinstall magnetic clip above the new panel in cabinet interior.
Figure A
- Remove magnetic
clip located above glass panel.
Figure C
– Swing bottom of
glass panel out, then lower
it away from unit.
Figure B
- Slide glass panel
up under top ridge.
Magnetic
Clip
General images shown for glass installation reference only.
