Pro Pop 12 Unimaxx
Models #2212, 2213, 2214, 2214ST
5
INSTALLATION INSTRUCTIONS
Checking Shipment
Unpack all cartons and check thoroughly for any damage that may have occurred during transit.
Damage claims should be filed immediately with the transportation company. Gold Medal is not
responsible for damage that occurs in transit.
Manual
Read and understand the operator’s manual and all other safety instructions before using this
equipment. To order copies of the operator’s manual go to gmpopcorn.com or write to Gold Medal
Products Co., 10700 Medallion Drive, Cincinnati, OH 45241 USA 1-(800)-543-0862.
Setup
This unit has been tested at the factory.
1. Remove all packaging and tape prior to operation.
2. Place the unit on a sturdy, level base.
3. The popper unit has 4 glide feet preinstalled at the factory. Install a Black Crutch Tip on each of
the 4 glide feet. Firmly push the crutch tip over the glide until it covers the glide entirely.
4. The door knobs are shipped facing the inside of the machine. Re-adjust knobs to face the
outside of the machine.
5. Carefully install the light bulb (do not over-tighten) into the lamp holder located in the cabinet
interior. Ensure the unit is OFF and unplugged before installing or changing the bulb (reference
the Electrical Requirements section).
6. Make sure kettle lead-in cord is securely plugged into unit, and twisted to lock into the kettle
receptacle.
7. After setup, unit should be cleaned prior to use (see Care and Cleaning section).
