background image

Citation, Whiz Bang & Pop-a-Lot

     A

LL

 E

XPORT 

M

ODELS

9

TO CLEAN REALLY BAD KETTLES

If you have not taken care of the kettle, and it has become blackened badly, some really hard
work is going to be required to clean it. Some folks find it easier to send the kettle back to their
dealer or to the factory for cleaning. However, this is costly. You can clean the inside of the
kettle with our Old Soak cleaner; make a solution as directed, turn on the kettle and let it boil,
then let it soak in, drain and rinse. NEVER dunk the entire kettle in the water. It will ruin both
elements and thermostats. If you want to soak the entire kettle in Old Soak, remove all the
wiring, elements and thermostats. This should only be done by an experienced service per-
son.

We do have a new product called Soak-Off which removes the burned oil encrustation rather
easily. You brush the material on the kettle, then scrape the softened residue off and rinse.

Do NOT use commercial oven cleaners on your popcorn machines. They usually are not
designed for aluminum and will turn the aluminum very dark.

LEARN HOW TO SELL MORE POPCORN

Your Gold Medal popcorn popper is engineered to produce the finest quality popcorn if you
use high quality ingredients, and if your electric line is not overloaded with other electric
appliances. Once you assume that you are turning out the finest gourmet quality popcorn, will
the world beat a path to your door to buy it? Absolutely not!

You must use every available source of popcorn "sales promotion" or "merchandising" infor-
mation. The sales representative who sold you this machine has access to "popcorn" point-of-
purchase posters. Virtually every popcorn supply distributor also has posters to help you
merchandise more popcorn.

The booklet, "101 Ways to Promote Popcorn and Other FunFoods" is loaded with up-to-date
merchandising ideas, and is available free of charge from the Gold Medal factory or your local
popcorn supply dealer. Be sure to ask for the book. Not every idea in it will apply 100% to your
situation, but there will be plenty of ideas that will work dramatically well for you.

If you're using your new Gold Medal popper in a snack bar with other snack foods of
FunFoods, then you will want to have a copy of the current edition of "How to Make Money
with Snacks". This book is edited every year and includes a wide variety of up-to-date informa-
tion on how to put together and profitably operate a FunFood snack bar.

Educational seminars are put on in many cities worldwide by Gold Medal dealers. Be sure to
ask your dealer for the dates of his next seminar. If he isn't planning one, encourage him to
put together at least a biennial "ideal exchange" seminar.

Yes, when you purchased this Gold Medal popper, you bought the finest value in popcorn
popping machines available anywhere in the world. But you must not plug the machine in and
forget about it. Rather, once you plug it in, start merchandising popcorn. When you put to-
gether your schedule of promotions and then implement the program from week-to-week or
month-to-month, you'll be delighted at the results your Gold Medal popper is bringing to you.

Содержание 2001EX





































Отзывы: