16 oz. Pop & Self-Serve
Model No. 1617E
Page 9
gmpopcorn.com
OIL DISPENSE PUSH BUTTON (PB) SWITCH & OIL LIGHT
Red Push Button Switch - dispenses a predetermined amount of oil into the kettle when
pressed. The Oil System Master Switch must be ON for the Oil Dispense PB Switch to
activate (reference the Instruction Manual for the oil dispense unit). The Oil Light on the
popper will light continuously when oil pump is dispensing.
During calibration of the oil dispense unit,
the Oil Light will blink ON-OFF to indicate
when the oil dispense unit is in program mode (reference the oil dispense unit manual for
oil calibration).
CIRCUIT BREAKER
The Circuit Breaker, located in cabinet interior on the ceiling of the popper, protects the
popper unit from overload condition. If unit is plugged in, but the kettle motor or oil
system does not come on when activated, then the circuit breaker may be tripped.
(Reference the Troubleshooting section of this manual).
Oil Dispense
Indicator Light
Oil Dispense
PB Switch
Oil System
Master Switch
Lights Switch
Kettle Motor
Switch
Load/Dump
Indicator
Warmer
Switch
Kettle Heat
Switch
