16 oz. Pop & Self-Serve
Model No. 1617E
Page 13
gmpopcorn.com
Sanitizing the Oil System (Tubing and Pump)
Reference the Oil Dispense Unit manual for oil system cleaning instructions.
Filter Cleaning Instructions
The popcorn machine is equipped with an efficient and durable filtration system. The filter
should be cleaned every 1-2 weeks to maintain maximum efficiency.
Weekly Clean the Crisper/Blower Filters
Follow the directions below each week to clean the crisper/blower filters.
1.
Turn machine OFF, unplug unit and allow it to cool before attempting to clean.
2.
Lift off the corn pan to view the blower assembly.
3.
Remove each filter guard from the filter assembly (reference filter image shown), then
lift filters out and clean using warm soapy water (or replace if needed). Rinse filters
thoroughly and allow to dry, before reinstalling.
Steps to Clean Filter
Step 1:
Turn unit OFF and allow it to cool before
removing filter. Filter is located inside the popcorn
machine, above the popping kettle.
Step 2:
Remove filter by gripping the filter itself and
pulling straight down.
Step 3:
Clean filter in warm soapy water, then rinse
and allow to dry overnight. Replace filter by putting it
into the slot and pushing upward. Make sure the filter
frame is flush with the ceiling of the popper (as shown
above).