manualshive.com logo in svg

Gold Line DSP2B, Руководство пользователя

Поделиться
Скачать
Gold Line DSP2B Скачать руководство пользователя страница 7

7 

 

INSTRUCTIONS FOR STAND-A-LONE MODELS DSP2B AND DSP2BP 

WITHOUT USING A COMPUTER 

 

INTELLIGIBILITY TESTING FOR

 

VOICE EVACUATION SYSTEMS 

 

REQUIRED EQUIPMENT:      

 

TALKBOX (requires 110vac or 8 AA Alkaline or Ni cad/NiMH batteries) 

 

DSP2B/BP (requires 110vac or 8 AA Alkaline or Ni cad/NiMH batteries) 

 

STI-PA CD test tones (included with DSP2B/BP & DSP30B/BP)  

 

In some situations, hearing protection might be warranted.   

 

See NFPA 72 for other possible requirements where the system being tested is an 
Emergency Communications System (ECS). 

 
 

INSTRUCTIONS TO MEASURE INTELLIGIBILITY (OPT STIcis): 

USING TALKBOX AND PUSH TO TALK FEATURE  

WITHOUT COMPUTER 

1.  Insert PA system microphone into Talkbox holder facing the speaker 
2.  Position the Talkbox loudspeaker at the normal mouth to microphone distance. 

NOTE:

 proper microphone to mouth distance should be 1 inch.(

See ANNEX D of NFPA72-

 

2010 for additional set-up information) 

3.  Play the STI-PA CD with the Talkbox  
4.  Insert analyzer microphone into the meter and turn on (will display the SPL dBA). Place 

the tip of the DSP2B/BP microphone 1 meter or approximately 39 inches from the 
Talkbox, facing directly at the  loudspeaker and adjust the Talkbox level to 65dBA.SPL 

5.  Place meter microphone in the area to be measured at expected ear level. 
6.  To make an intelligibility test, set the Analyzer to the intelligibility mode by pressing the 

(MODE SELECTOR) on the bottom of the analyzer, until the CIS LED is lit.  If your 
specification provides for STI, rather than CIS, depress the Mode Selector until the STI 
LED is lit.  

7.  To start the test Press the 

[TEST]

 Button. Test results will display in 15 seconds 

8. If 

“Err”

 is displayed, press the 

[dBA] 

Button and repeat from step 8 as reliable data 

could not be collected. 

NOTE: 

In the event of an STI failure, possible reasons may include; An unfurnished room under   

 

test will produce a significantly lower STI value since the large flat reflective surfaces 

 

will add echoes and the lack of absorptive materials will also increase RT60 times and 

 

reduce the STI value further. 

9.   If the “BAT” symbol is shown, replace batteries.  

 

 
 
 
 
 
 
 

Содержание DSP2B






















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды