PAGER PROGRAMMING SOFTWARE
Getting Started
May 17, 2007
1
ALA26
Getting Started
The ALA26 Pager Programming software, provides the flexibility to program ALA26
pagers to meet individual requirements. To obtain the best results from the product,
please take a few minutes to read this instruction guide.
Equipment Required
To install and operate the programmer, you need a system that meets the following
minimum requirements:
An personal computer (PC) with printer port, or compatible
Windows 98 SE or above operating system (XP Recommended)
256 MB of RAM
ALA26 Programmer
An USB cable
ALA26 Pager Programming Software
Equipment Setup
Refer to Figure 1 while performing the follows:
1. At the rear of the PC, connect the USB cable to the usb port on your computer.
2. Plug end of the USB cable into the ALA26 programmer.
3. Hardware installation is complete.
