PAGER PROGRAMMING SOFTWARE
ALA26 Programming
May 17, 2007
19
ALA26
4
Battery Gauge Level-Med
This value represents the battery voltage level necessary for the battery gauge to
display a full battery. If the battery voltage is higher or equal to this value, the full
battery gauge icon is displayed. Valid selections are: 1.58V, 1.53V, 1.48V, 1.43V,
1.39V, 1.35V, 1.29V, 1.23V, 1.19V, 1.14V, 1.09V, 1.05V, and 1.00V. The High
level must be greater than the Med level, and the Med level Must be greater than
the Low level. None of the levels can be equal to each other.
4
Battery Gauge Level-Low
This value represents the battery voltage level necessary for the battery gauge to
display a full battery. If the battery voltage is higher or equal to this value, the full
battery gauge icon is displayed. Valid selections are: 1.58V, 1.53V, 1.48V, 1.43V,
1.39V, 1.35V, 1.29V, 1.23V, 1.19V, 1.14V, 1.09V, 1.05V, and 1.00V. The High
level must be greater than the Med level, and the Med level Must be greater than
the Low level. None of the levels can be equal to each other.
Push Key Lamp On Enable
If it is selected, the back-light will turn on after any key be pressed.
RD Key Delete Enable
If it is selected, the RD key can use as delete feature at read message moment.
RD Key Pager Off
If it is selected, the RD key can use as Pager off feature at time display moment.
Long Message Control Enable.
If it is selected, then the message most length is 2,000 characters, otherwise the
length only can be 300 characters.
Beep And Vibration
If it is selected, beep and vibration will active together.
4
Paging Display
If “Direct” is selected then the message will show on the display at a message
received. Otherwise it only shows a message location icon on the display.
Direct Show Lamp On
When the paging display is “Direct”, if it is selected, the back-light will turn on at a
message received.
