GOK GS Pro-Fi 3, Сборка и руководство по эксплуатации

Страница: 25 / 96

Combined heating oil filter breather type GS Pro-Fi
®
3
START-UP
Once leak testing is completed and the system is leak-tight, only the toggle valve of
the tank discharge fitting or, for systems without toggle valve, the shut-off safety
device must be opened. The vacuum still present in the line will suck fuel oil
immediately. If required, re-pump.
Unless specified differently in the burner/boiler manufacturer’s manual, the procedure is as
follows:
• bleed the installed oil lines (burner supply and return
lines) and the fittings using a suction pump and fill
in fuel oil
• open the shut-off fitting and the vent screw
• connect the suction pump directly at the vent screw
using the supplied adapter item no. 13610-60
• only stop the suction process once the vent tray is
filled with oil as well
• close the vent screw in a leak-tight manner
OPERATION
During ongoing operation of the oil system, the GS Pro-Fi
®
3 does not require any operation.
The integrated shut-off fitting must be opened. For this, the rotary handle must be rotated in
the flow direction.
Due to the design of the GS Pro-Fi ® 3, the full fuel oil column without any noticeable shares of
air is available when starting the burner.
TROUBLESHOOTING
Fault cause
Action
Hose rupture in the supply or
return line
• Burner switches to failure due to the sucked in ambient air
Restore the leak-tightness of the system
Released air in the vent tray
• Burner switches to failure due to the sucked in ambient air
Restore the leak-tightness of the system
Strong noise generation of the
burner pump
• Filter insert is clogged
For replacing the filter insert, see MAINTENANCE
Level in the filter tray
decreases
•
System has a leak
Restore the leak-tightness of the system
Filter tray runs empty,
• System has a leak
Restore the leak-tightness of the system
Item No. 13 512 53 9 / 16