Gogen DXHS722, Руководство пользователя

Страница: 84 / 88

EN - 84
TroUBLEsHooTInG
Before resorting to maintenance service, please kindly check by yourself with the
following chart.
symptom Cause(s) remedy
no power the Ac power cord is not con-
nected to the power supply or is
not connected to a power supply
securely.
• Please check that the Ac power cord
is connected securely.
•
picture
there is no
picture or the
picture is
distorted.
the video cable isn‘t
connected securely.
Video output mode of this unit
isn‘t correctly set.
Video input mode of the con-
nected tV isn‘t correctly set.
•
•
•
connect the video cable securely.
Press [V-MODE] repeatedly until the
picture becomes normal again.
Set an appropriate video input mode.
•
•
•
sound
there is no
sound or the
sound is
distorted.
the audio cables aren‘t con-
nected securely.
the volume is set to the mini-
mum level.
the sound is switched off.
the disc is in fast forward/rever-
se playback.
•
•
•
•
connect the audio cables securely.
turn up the volume.
Press [MUtE] on the remote control
to
switch on the sound.
Press [PLAY].
•
•
•
•
Unable to
play a disc
this disc is placed in the disc
tray in a wrong way.
the rating of the disc is higher
than the rate set in the parental
control item.
the unit isn‘t compatible with the
disc.
the disc is dirty.
•
•
•
•
check that the disc is placed in the
disc
tray with its label side upwards.
Reset the settings in the parental
control
item.
clean the disc.
•
•
•
The player
breaks down
when a UsB
drive is
inserted
into the
player.
the connected USB drive is pro-
bably not of a certified one.
• the player cannot play any uncertified
USB drive. In case the player breaks
down, turn it off, disconnect the power
cord from the Ac outlet and unplug
the USB drive from the player. then,
power on the player again. the player
will resume the normal status.
•
The buttons
on the unit
doesn‘t work.
the unit is being interfered with
static electricity etc.
• Switch off and unplug the player. then
connect the plug to the power supply
and switch it on again.
•
The remote
control does
not function.
there is no battery in the remote
control.
the batteries are out of charge.
the remote control isn‘t pointed
to the remote sensor.
the remote control is out of its
operating area.
the unit is shut down.
•
•
•
•
•
Install two AAA/1.5V batteries in it.
Replace the batteries with new ones.
Make sure that the remote control is
pointed to the remote control sensor.
Make sure the remote control is within
the operating area.
Switch off the unit and disconnect it
from
the Ac outlet. then power on the unit
again.
•
•
•
•
•