GoFit Platinum GFTMS01, Руководство пользователя

Страница: 12 / 20

- 12 -
III. Edit Mode:
1) At Start/Ready position, press Mode to choose Manual and Program by press +/- key.
2) Program Mode: Press +/- key to edit the Program (P1~P8), and the PROGRAM
3) window will flash, LCD window will show P1~P8 to edit, you can press +/- key to edit.
Press ENTER to enter the TIME edit, the Program pre-set value is 30min, Range is 20~99min,
STEP is 1min. After edit, press ENTER or START to start the machine.
If you press START directly during edit, the rest un-edited functions are pre-set.
During edit, INCLINE and SPEED window will display first level value.
The matrix window will display the picture.
4) WARM UP and COOL DOWN function: During WARM UP or Program position, change
speed or inclination, the value will increase or decrease in the next level.
COOL DOWN is not affected and STOP is the only function which can be carried out.
5) PROGRAM has 30 levels in all. The three anterior are WARM UP, the three later are COOL
DOWN. Each is 3 minutes. The setting time except anterior and later which mean 6 minutes
will be execute averagely by surplus 24 levels.
6) 9 HOLES mode has no functions of WARM UP or COOL DOWN. When distance is equal
to 3.5KM, the motor will stop, the INCLINE is 0 and displays” End”
** When the SAFETY KEY is taken off and then replaced, it will not revert to original position.
You need to press start key to perform the incline to reposition it.
** Under start/ready status, if you continuously press stop key for 5 seconds, it will reposition.
** During any program, if you press stop key, the program will stop.
If users want to continuously perform the program, press start key or again press stop
key to leave the program and back to start/ready status
IV. Program Operation and Instruction
：
1) When you press START, it will begin to count down for 3 seconds, after that, the motor will start,
speed begins at 1 .0KPH (0.6MPH).
2) Speed STEP is 0.1, you can press SPEED UP/DOWN key to select (the speed UP/DOWN
step is 0.1), or press speed instant key 1'2' 4' 6 '8' 10 to select.
3) Incline STEP is 1, you can press INCLINE UP/DOWN key to select (incline UP/DOWN step is
1), or press incline instant key 2 '4 ' 6 ' 8 ' 10 ' 12 to select.
4) SETTING TIME: