GoFit Platinum GFTMS01, Руководство пользователя

Страница: 10 / 20

- 10 -
MAINTENANCE
1
. Centering the Walking Belt.
If the Walking Belt tracks off center to the
right or left of the deck, first turn the power off.
Then use a wrench to tighten the rear roller
bolt on the side of the treadmill toward which
the belt is moving. For example, if the belt
moves to the left and the deck becomes
exposed on the right, tighten the bolt on the
left side of the frame. Tighten about 1/4 of
turn (clockwise). If the belt does not move
back to the center of the treadmill, make
another adjustment to the same bolt.
Once the Walking Belt has been adjusted
closer to the center, the treadmill can be
started again.
•
Make sure the walking belt is going on
right without any tracks off the centers
2. It is recommended that the deck be
lubricated every 6-12 months according to the
frequency of usage. First, use the wrench to
loosen the bolts and end caps. Pull up the
Walking Belt, dispense the lubricant on the
deck and spread evenly. After lubricating the
deck, center the belt and check the belt
tension. If the belt happens to slip, follow the
above steps and lubricate the running deck.
SUGGESTED PREVENTIVE MAINTENANCE SCHEDULE IN
ACCORDANCE WITH THE AVERAGE RUNNING SPEED
Measurement Speed Interval
Metric
6KM/hr
below
1 year
6~12KM/hr 6 months
12KM/hr
above
3 months
English
4mile/hr
below
1 year
4~8mile/hr 6 months
8mile/hr
above
3 months
Note: This preventive maintenance
schedule is only meant for home use.